Engine flushing

The main topic for motorists has always been the correct operation of the engine. But there are often common questions in which the opinions of car owners may differ.

• Is it necessary to wash the engine at all?
• When and how often to do this procedure?
• Which washing method and which agent to choose?

If you answer the question, you need to wash it.

But this procedure is not always necessary.

Trust the professionals of MB Master and we will wash the engine quickly and efficiently.

Mandatory washing is required in such cases if the car is bought from hand, not in the salon.

• After all, one cannot be sure that the previous owner of the vehicle provided proper care for the car, namely: changed the oil on time, used quality lubricants, did not operate the car”
• when you want to change the oil in the engine. For example, to switch from mineral oil to synthetic oil, or when making a decision to fill in another brand of oil, etc. After all, oils can have various additives
• when you realized that low-quality oil was poured into the system
• if you use a car in difficult conditions – you often drive on a bad dirt road, you prefer an aggressive driving style, you use the car for a long time without stopping, especially in the heat, etc.
• If your car has a turbocharged engine.
• when the vehicle mileage exceeds 50,000 km
• if the power unit was overhauled

In order to understand which engine flushing is suitable for you, you need to familiarize yourself with the types of flushing.

Long-acting washing is necessary:

• if the mileage of the car has reached up to 100,000 km
• if repair works were carried out with the engine, for example, boring

Disadvantages include time costs, low stability of the oil film, and weak activity of the chemical reaction.

Quick-acting: 5-minute, 15-minute

• In such types of washing, a special additive of 300 milliliters is added to the old lubricant. Then the oil is poured immediately to the full volume (4-5 liters) for a short time, while it drains.
• Quick washes have the same characteristics as long washes, and can be one of the options offered by the manufacturer.

Washing is a very useful thing and necessary in all cases.

• additives contained in wash
• ing oils can contribute to the rapid destruction of rubber products (such as, for example, crankshaft oil seals);
• the viscosity of the oil decreases and therefore it no longer copes with the tasks set before it

It is also worth noting that short-term washing is also not always the case useful After all, it may not completely cope with its work and not remove hardened mud, but simply soften it.

The best way to solve the problem with flushing is an ordinary high-quality engine lubricant, on which, unlike flushing fluids, you can not only “let the engine idle for 5-15 minutes”, but also drive more than one hundred kilometers.

The following scheme is optimal:

• you pour high-quality engine oil into the engine
• drive it for half of the recommended oil change period

Advantages: gradual washing of the engine.

This can be avoided

• clogging of thin oil channels
• violation of lubrication by particles of sludge and deposits
• accumulation of mud in the crankcase near the oil intake
• oil sump blockage
• sedimentation of the washed sludge in the “pockets” of the internal cavities of the engine

With this method of washing, the engine will be cleaned gradually, without the risk of clogging narrow oil channels with deposited residues channels in the cylinder block, crankshaft and the like.