Contact us

phone

Kyiv

st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
Kyiv
decor Мережа СТО в місті
  • Kyiv
MB Master (Vokzalna) Kyiv st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
Прокласти маршрут +38 (097) 299 29 95
MB Master (Poznyaki) Kyiv 18 Teplovozna Street (Poznyaki)
Прокласти маршрут +38 (068) 299 29 95
MB Master (Podil) Kyiv 46 Kyrylivska St. (Podil)
Прокласти маршрут +38 (068) 299 29 98

Kyiv

st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
Kyiv
map
decor Мережа СТО в місті
  • Kyiv
MB Master (Vokzalna) Kyiv st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
Прокласти маршрут +38 (097) 299 29 95
MB Master (Poznyaki) Kyiv 18 Teplovozna Street (Poznyaki)
Прокласти маршрут +38 (068) 299 29 95
MB Master (Podil) Kyiv 46 Kyrylivska St. (Podil)
Прокласти маршрут +38 (068) 299 29 98
phone
decor
Години роботи Години роботи

Daily from
08:00 - 20:00

MB Master (Vokzalna) Kyiv st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
+38 (097) 299 29 95
MB Master (Poznyaki) Kyiv 18 Teplovozna Street (Poznyaki)
+38 (068) 299 29 95
MB Master (Podil) Kyiv 46 Kyrylivska St. (Podil)
+38 (068) 299 29 98
Replacing the dual-mass flywheel

Replacing the dual-mass flywheel

Need a high-quality replacement of a dual-mass flywheel in Kyiv? Contact the MB Master car service - we will do everything professionally, with a guarantee and at a fair price!

Запис на послугу

    City and address of service
    Choose from the list
    c. Kyiv
    MB Master (Vokzalna)
    address st. Hetman Pavel Skoropadsky, 63 (Vokzalnaya)
    time Daily from 08:00 - 20:00
    Завантаження...
    c. Kyiv
    MB Master (Poznyaki)
    address 18 Teplovozna Street (Poznyaki)
    time Mon-Sut 09:00 - 19:00
    Завантаження...
    c. Kyiv
    MB Master (Podil)
    address 46 Kyrylivska St. (Podil)
    time Mon-Fri 08:00 - 20:00
    Завантаження...

    Why you should contact the MB Master car service to replace the dual-mass flywheel:

    1. Experienced craftsmen - we specialize in VAG-group cars, we know all the intricacies of repair.

    2. Modern equipment - inspection and replacement are carried out strictly according to the regulations, without "by eye methods".

    3. Honest price - fixed cost without hidden charges.

    4. Warranty for work - confidence in quality and safety after repair.

    Signs of a broken dual-mass flywheel may appear as follows:

    Signs of a broken dual-mass flywheel may appear as follows:

    1 Noise when starting or stopping the engine - a metallic clanking or knocking.

    2 Vibrations under load - noticeable during a sharp start or braking.

    3 Clutch slipping - the car reacts more slowly to pressing the gas pedal.

    4 The appearance of backlash - the mechanism becomes "loose", which can cause additional wear.

    A dual-mass flywheel is an important part of a car’s clutch. It is responsible for smoothing out small vibrations coming from the engine.

    Its components are: a primary mass and a secondary mass. Thanks to the interaction of these parts, vibrations are smoothed out using a spring-loaded damping element.

    Replacing a dual-mass flywheel is a problem that is often addressed to the MB Master car service.

    The main tasks of a dual-mass flywheel:

      • makes the car move smoother;
      • dampens vibrations;
      • increases driving safety;
      • makes the engine last as long as possible.

    How is the dual-mass flywheel checked?

    Carefully inspect the box in which the mechanism came. If it has heavy dirt, footprints, signs that it fell to the floor, or you simply see negligence in packaging, then such a flywheel should never be installed on the engine. For this part, it is enough to fall from a height of half a meter. Then the bushing or bearing will be completely destroyed, and the flywheel will never work again.

    Measuring the inclination of the secondary mass

    1. Заміна двомасового маховикаFind a reliable base for fixing the dial indicator.
    2. Install the indicator on the edge of the flywheel (on the surface of the secondary mass, closer to the outer part).
    3. Press the primary mass with your fingers near the place where the indicator is installed.
    4. Reset the device to zero (reset the readings).
    5. Press the point of the secondary mass located 180° from the previous one.
    6. The difference between the two positions is this is backlash. To get an accurate result, measure at several points.

    The backlash norm depends on the design:

    • with a roller bearing – up to 1.6 mm

    • with a bushing – up to 3.2 mm

    Measuring the angle of rotation

    1. Place the flywheel with the secondary mass up.
    2. Make a mark that fixes the relative position of the primary and secondary masses.
    3. Rotate the secondary mass counterclockwise until you feel resistance or the action of the elastic damper.
    4. Make a second mark.
    5. Determine the angle between the two marks – this is the angle of rotation.

    What can’t be done when checking?

    1. Do not check the flywheel “by eye” without special equipment.

    2. Do not shake the flywheel in the air and from side to side.

    3. Do not draw conclusions based on sounds that occur during mechanical manipulations.

    4. Do not refuse to install the flywheel only because of a noticeable backlash that is within the norm.

    5. Do not ignore the importance of the thermal clearance in the plain bearings

    6. Do not neglect accurate measurements to avoid dangerous situations on the road.

    Our works
    Reviews
    Vadim

    Vadim

    2024-06-01
    decor

    I contacted them to replace the dual-mass flywheel. The work was done professionally, accurately, and within the agreed time frame. After the repair, vibrations and extraneous noises disappeared, the engine runs smoothly.

    Oleksiy

    Oleksiy

    2024-05-28
    decor

    I replaced the dual-mass flywheel in this service. The craftsmen explained the condition of the unit in detail, selected a high-quality flywheel and completed the work without delay. Very pleased with the result.

    Igor

    Igor

    2024-05-16
    decor

    I entrusted the replacement of the dual-mass flywheel to this car service. The work was done quickly and accurately, using original spare parts. The car works stably after the service, I recommend it.

    Other services
    Automatic transmission repair

    Automatic transmission repair

    If you need to check the serviceability of the automatic transmission (AT). МВ-Master service offers to perform a full diagnostics of the box. We will repair the detected breakdowns of all units and parts in the shortest possible time. Repair of AT of any complexity.

    Ignition system diagnostics

    Ignition system diagnostics

    At the МВ Master car service, we will perform a full diagnosis and repair of the ignition system using modern equipment. We will conduct diagnostics, identify all malfunctions and select high-quality replacement parts from leading manufacturers.

    Installation of a rear view camera

    Installation of a rear view camera

    Would you like to check the validity of the sensors and cameras of your car? МВ Master car service technicians are certified to provide comprehensive services including testing, diagnostics and repair of these elements, as well as installation of rear view cameras.

    Installation of additional equipment on the car (headlights, steering wheel, lights)

    Installation of additional equipment on the car (headlights, steering wheel, lights)

    If you want to modernize your car, you will need to install additional equipment on the car. МВ Master car service specialists offer comprehensive services in this category, guaranteeing high quality work and providing assistance in selecting the necessary elements.

    Russification and firmware of the car stereo

    Russification and firmware of the car stereo

    If you need to Russify and flash your car's stock radio, experienced specialists from the МВ Master car service in Kyiv are always at your service. We offer comprehensive services for testing, diagnostics, restoration and repair of this car component.

    Timing kit replacement

    Timing kit replacement

    The specialists at МВ MASTER are ready to provide professional advice and perform high-quality replacement of the timing set. We use only proven parts and comply with all manufacturer's regulations to ensure that your car runs stably and safely.

    Transmission diagnostics and repair

    Transmission diagnostics and repair

    Do you want to check the health of your car's gearbox? МВ Master offers you to undergo diagnostics and prevent possible breakdown of the main gearbox components

    Replacement the engine oil

    Replacement the engine oil

    Oil change is carried out according to the manufacturer's regulations, as a rule, every 10-15 thousand kilometers. For longer engine operation, we recommend changing the oil every 7-10 thousand kilometers. After repair work on the engine, it is necessary to change the oil again after 500 - 1000 km.

    Professional quality equipment